Features 特征

• Heavy-dust wing nut is ruggedly built specifically to with
  stand the hammer blows commonly used to tighten
  and loosen this coupler.
  

• Assembled valve seal can permits full pressure connect
  and disconnect, without seal washout.
  

• The flush face valve keeps air inclusion and spillage to
  a minimum.
  

• Corrosion resistant brass coupling, makes it compatible
  with a widely range and provides windely functionality.
  

• Compatible with PARKER 6100 Series, FASTER FB
  Series, AEROQUIP 5100 Series and HANSEN 96
  Series.
  
  

• 采用实心钢棒料加工制造，所以耐用性好。
  

• 本系列母插座采用螺纹套筒锁定结构，与公插头相应
  的外螺纹配套使用。连接时公母两部分必须通过螺纹
  

• 采用手动方式结合在一起。
  

• 阀采用坚硬的铬合金钢球。钢球被弹簧加载以使牢固
  的固定在阀座处。
  

• 阀提供钢球与内锥面之间的金属对金属密封。
  

• 接头密封为聚氨酯橡胶材料，能抵抗高压力下挤出。
  

• 螺纹阀挡圈提供阀止挡，保证阀能牢靠的对中。
  

• 并与下列产品互换：美国派克(PARKER) 3000系列、意
  大利快事达(FASTER) PVVM系列。

Applications  应用

HZ-L3(KZEBB) series is a thread-to-connect. it can be widely used in various
application, this application be connected under pressure and less spillage or nonspillage.
HZ-L3(KZEBB) series can be suitable used in connecting equipment of the hydraulic
lines like power tongs, swivels and mobile drillings, it also windely used dump tracks,
and dump trailer to connect with to wet line hydraulic system. And it also suitable used
in submersible pumps, engine test stands, and the equipment require connect under
high pressure or high liquid transfer.
HZ-L3(KZEBB)系列通过螺纹连接的接头可用于较大范围的工作应用， 这类应用需要
能在压力下连接的重型接头，而且溢流很少或没 有溢流。
HZ-L3(KZEBB)系列可理想地用于连接设备上的液压系统，例如电动夹，转轴及移动
钻机。它还广泛用于自卸车以连接拖车与湿式液压系统。其他使用包括：浸没式泵，
发动机试验台及许多其他需要在压力下连接的高流量接头应用。