The current position:Home > Products
Sharing site
HZ-T1 Close Type Super High Pressure Hydraulic Quick Coupling (Steel)
HZ-T1 Close Type Super High Pressure Hydraulic Quick Coupling (Steel)
HZ-T1 Close Type Super High Pressure Hydraulic Quick Coupling (Steel)
The category:Quick Couplings
The release date:2016-10-16
browse:
tel:+86 155 0326 7999
Share:


Applications  应用

The HZ-T1 series couplings are found in the construction, railway maintenance
and house moving industries. Used on hydraulic jacking equipment,these couplers
eliminate costly down time caused by improperly connected threaded types. For
use where high pressure capability is required coupled with positive coupling action.
Considerably faster to use than threaded types.
HZ-T1系列接头可用于建筑、铁路维护及房屋移动行业。用于液压千斤顶设备时,这
类接头可消除由螺纹连接不当引起的代价较高的停机时间。对于需要高压应用状况
下,需要可靠的连接方式这种快速接头比螺纹型连接快的多。

Features 特征

  • Positive valve stop, the perch maintains valve alignment and provides metal to metal
    valve stop to ensure that the valves openfully, every time.

  • Precision machined valves with electrometric seal provide for positive shut-off upon
    disconnection.

  • Hardened nipples and sleeves and solid barstock construction make for a quality
    coupling with maximum resistance to damage from hydraulic and mechanical
    shock.

  • Durable ball-locking mechanism assures reliable connection every time. A large
    number of locking balls distributes and workload evenly while providing alignment
    and swiveling action toreduce hose torque and prolong hose life. CAUTION:

  • These products are not to be used as swivels; rotation under pressure will result in
    excessive and premature wear.

  • Small diameter mating seal helps keep separating forces to a minimum, allowing for
    easier connect and disconnect at pressure up to 5000 PSI.

  • Sleeve locking mechanism prevents accidental disconnection when coupling is
    dragged along the ground.

  • Compatible with PARKER T1 Series.



  • 牢靠的阀止挡。阀轴架可保持阀对中并提供金属对金属的阀止挡,从而确认每次阀
    都可以完全打开。

  • 带橡胶密封件的精密加工阀可在断开后提供牢靠的关系。

  • 经过淬火处理的公接头和套筒以及实心棒料结构造就优质接头,它可最大的抵抗由
    于液压和机械冲击而造成的损坏。

  • 耐用球锁机构保证每次都能可靠连接。更多数量的锁定钢球均匀分配工作负载,同
    时提供对中及旋转动作从而减小软管扭曲并延长软管使用期。警告: 这类产品不能
    用作旋转接头,在压力下旋转会导致过度和过早磨损。

  • 套筒锁紧机构可防止接头在地上拖动时意外断开。

  • 并与下列产品互换:美国派克(PARKER) T1系列。


On a product:HZ-C3 Push And Pull Type Hydraulic Quick Coupling (ISO5675)
The next product:HZ-T1HZ-T2 Super high Pressure Quick Coupling (Steel) 70MPa
Download the HT Hydraulics Fittings Catalogue now
DOWNLOAD
Contact Us
peng4355
+86 155 0326 7999
ht@hthydraulics.com
         service@hthydraulics.com
Copyright © 2016 HT-HYDRAULICS All rights reserved.